>

FZ   FX
SHO

 
ISLAND RACING
FZR / FZS RIDEPLATE MODS

ISLAND RACING is the ORIGINATOR and LEADER in rideplate modifications for Yamaha watercraft and the FZR and FZS are no exceptions. Be the FIRST to gain the PROVEN additional speed associated with one of OUR rideplates. Our modifications are designed to extract the most speed as physically possible from the rideplate.

 
PARTS & ACCESSORIES

 
3M MARINE ADHESIVE SEALANT 4200 FAST CURE
06560 $29.99 White 10 Ounce
06564 $29.99 Black 10 Ounce

We all know "pump sealing" is a must on all Yamaha models for reducing cavitation and increasing performance. 3M 4200 FAST CURE is the most commonly used sealant by ALL watercraft owners and IS the recommended sealant to use for your Yamaha pump sealing needs.

 
   
AIRHEAD BUNGEE DOCK LINE
AHDL-4 $11.99 4' Stretches to 5.5'
AHDL-5 $12.99 5' Stretches to 7'
AHDL-6 $13.99 6' Stretches to 9'
  
AIRHEAD Bungee Dock Lines absorb shock to boats, cleats, docks, pylons and other hardware. The bungee cord is hidden inside the rope and acts as a built-in snubber. Two foam floats protect the boat from chafing. There's a sliding adjustment at both ends for quick docking. Recommended for docking boats and PWC's up to 3,500 pounds. Tensile strength is 2,150 pounds. Black/Blue/Red color scheme.

AIRHEAD HULL HUGR PWC FENDER
HH-P1B $21.99
  
Docking a PWC has never been safer with the introduction of the HULL HUGR PWC Fender. Engineered specifically for PWCs, it hinges in the center to better protect PWC bodies from docks designed for bigger boats. It hooks under the rub rail with a molded acetyl hook integrated into the back of the fender. If your PWC has them, you'll want to connect the top of the fender to a cleat or ski eye with the adjustable strap and vinyl dipped steel hook provided. If not, simply thread the strap though the rubber block provided and place it inside the PWC's storage compartment, then shut it. The block anchors the fender strap perfectly and will not damage the body. We recommend 2 fenders per PWC. Fits all PWCs.

AMSOIL SYNTHETIC MARINE ENGINE OIL 10W-40
WCFQT $12.65
 
For use in 4-stroke gasoline fueled engines in marine applications. Offers unsurpassed wear protection, viscosity stability, low volatility and excellent rust protection. NMMA FC-W approved and "warranty certified". For use in 4-stroke outboard and marine inboard engines. Also excellent for personal watercraft.

AMSOIL OIL FILTER
EAOM134 $15.15

AMSOIL Ea® Oil Filters feature advanced full-synthetic media that traps and holds a greater amount of small, wear-causing contaminants compared to conventional filters. Efficiency is the filter's ability to capture contaminants. The more efficient a filter is, the more contaminants it will remove from the oil. AMSOIL Ea Oil Filters have one of the best efficiency ratings on the market. Ea Oil Filters provide a filtering efficiency of 98.7 percent at 20 microns.

AMSOIL DOMINATOR SYNTHETIC RACING GREASE
GRGCR-EA $14.85
   
AMSOIL DOMINATOR® Synthetic Racing Grease is engineered to protect high-performance bearings and chassis components in racing applications operated on snow, dirt, water or track. It provides superior protection for bearings operating under high-speed, high-heat and heavy-load conditions. NLGI #2 GC-LB

AMSOIL SYNTHETIC WATER RESISTANT GREASE
GWRCR-EA $9.50

AMSOIL Synthetic Water-Resistant Grease is an extreme-pressure grease formulated specially for wet-duty performance. Composed of premium-quality synthetic base oils and calcium-sulfonate complex thickeners, Water-Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Its water-washout and sprayoff resistance are outstanding for applications frequently exposed to water.

AQUA SPORT 2 DEGREE PUMP WEDGE
YH-16003 $85.00
  
2° pump wedge for 2008-present Yamaha 1.8L Waverunner watercraft. The pump wedge is CNC machined out of a single piece of 6061 Aluminum, finished in a black anodized coating that protects it from salt water and features a double-sided lip to retain silicone sealant and prevent cavitation. We extensively tested our pump wedge to ensure that there are no handling compromises. The pump wedge lifts the bow of your craft reducing drag and substantially improving top-speed.

AQUA SPORT ARP FLYWHEEL BOLT SET
YH-15003 $24.00
 
Custom set of ARP flywheel bolts. These bolts are forged and thread rolled after being heat-treated which provides up to 10-times longer fatigue strength. They are precision CNC-machined to exact specifications. Made from 8470 chrome moly steel, with 180,000 PSI tensile strength. Set includes 6 bolts and an instruction sheet. Fits all Yamaha 1.8L HO SHO SVHO personal watercraft.

AQUA SPORT ARP HEAD STUD KIT
YH-15001 $186.00
 
Custom set of ARP head studs. Part #: YH-15001. These studs are forged and thread rolled after being heat-treated which provides up to 10-times longer fatigue strength. They are precision CNC-machined to exact specifications. Made from 8470 chrome moly steel, with 200,000 PSI tensile strength. Set includes 10 studs, 10 12-point nuts, 10 parallel ground washers, and instruction sheet. Fits all Yamaha 1.8L Waverunner watercraft. Studs used to bolt down the cylinder head to the engine block.

AQUA SPORT BILLET MANUAL TIMING CHAIN TENSIONER
YH-10027 $100.00
  
Performance billet T6-6061 aluminum construction, anodized black finish, manual timing chain tensioner. Direct replacement for the factory automatic timing chain tensioner. Unlike the automatic factory timing chain guide, a manual timing chain tensioner will not loose it's setting and will keep the timing chain adjusted at all times. Comes with an o-ring to provide seal, no need for a gasket.

AQUA SPORT INTAKE MANIFOLD THERMAL INSULATOR GASKET
YH-12001 $48.00
  
Yamaha 1.8L Waverunner watercraft thermal insulating intake manifold gasket. Precision cut and designed to replace the listed oem gaskets. Gaskets helps to reduce heat transfer between the cylinder head and the manifold to decrease intake air temperature, and increase horsepower. Hotter air is less dense and thus has less oxygen per given volume, so less oxygen is available for combustion robbing you of power.

AQUA SPORT INTAKE MESH DELETE RING
YH-16002 $35.00
 
Billet aluminum construction, CNC machined, anodized red finish. Replaces the mesh in the intake assembly to improve air flow and increase horsepower. Instructions included.

AQUA SPORT OXYGEN SENSOR MOUNT KIT
YH-16005 $120.00

The kit contains a mount anodized in black (to avoid things like corrosion, and other damages), 5 bolts, 1 allen key, and gasket.

  • Replacement to OEM plug
  • Easy to install
  • Made in USA

 
   
AQUA SPORT THROTTLE BODY MOUNT
YH-16001 $85.00
  
Billet throttle body mount for Yamaha 1.8L Waverunner. Billet aluminum construction, CNC machined, and anodized red. Includes stainless steel bolts and washers, as well as an Allen key to tighten the mount to the intake manifold and the throttle body to the mount. Much stronger than the plastic OEM one. Replaces OEM part # 6S5-14360-00-00. Made in the United States.

AQUA SPORT TITANIUM RETAINER SET
YH-10005 $313.00
  
Intended for OEM factory springs. Retainers are manufactured with high quality military cetified Titanium alloy and precision CNC machined for a tight fit that will ensure a long durability. Set includes: 16 Titanium Retainers We use both Ti 17 & Ti 64 for the manufacturing of our retainers for excellent strength and wear resistance at 40% less weight than steel retainers. Our materials are tested and certified for chemical purity, uniform grain microstructure, and superior mechanical properties and sonically tested to be imperfection free.

AQUA SPORT VALVE SPRING LOCATORS SET
YH-10002 $106.00
  
These premium quality valve spring locators are manufactured from hardened 4140 steel alloy that not only protects the cylinder head casting and shim, but also precisely locates and holds the valve spring in place. These locators feature a CNC machined inside diameter which perfectly locates on the valve guide outside diameter with tighter tolerances than any competitor's locators. Don't compromise high quality for a low price. Features: Protects the spring pocket/shim while properly locating & holding the valve springs in place This I.D. locator is engineered with the locating shoulder on the inside diameter Designed to handle the extreme spring pressures and high RPM in racing engines Heat treated for long life expectancy. 

ATLANTIS DOCK LINE
A1941 $17.95 Black
A1944 $17.95 Blue
A1938 $17.95 Red
A1936 $17.95 Yellow
 
Made of solid braid, multi-filament polypropylene. It's 12' lightweight line features a standard loop at one end providing a quick and easy way to secure your personal watercraft or boat. Multiple uses: Towing, docking, launching, beaching, and anchoring. Benefits: stays soft, easy to handle, floats, no metal clips to scratch the watercraft, retains color no bleeding! Resists saltwater, UV rays, fuel/oil and mildew, will not dry rot.

ATLANTIS DUCKBILL DRAIN KITS
A2025 $39.95

Now you can add a simple drain system to keep your bilge empty as you drive! Our complete kit comes with all the hardware for the easy installation. Just unscrew your drain plug and screw our duckbill drain plugs in place. Keep your old one if you ever need to change! Screws right into existing backing plate on the FZR/FZS. ( Two required )

ATLANTIS FLOATING WRIST LANYARD
A8139 $18.95 Blue/Black
A8147 $18.95 Black/Black
A8158 $18.95 Red/Black
  • Clip apart so they can be used as wrist or vest lanyard
  • Made of polyurethane cord that floats
  • Come with one-hand easy-glide slider
  • Available in a variety of colors

ATLANTIS FLUSH KIT
A8582B $19.95

ATLANTIS PRO FLOATING WRIST LANYARD
A8130 $23.95 Black

BEL-RAY MARINE EXTREME PRESSURE WATERPROOF GREASE
99710-CG $10.95 14oz Cartridge
  
A heavy duty, premium grease fortified with Extreme Pressure additives. The addition of aluminum complex thickeners allows it to be virtually waterproof and ideal for items subject to direct contact with water. Unaffected by either salt or fresh water, it provides unsurpassed rust and corrosion protection on any treated surface exposed to harsh marine environments.

BELRAY OIL FILTER
SV57808 $8.95
 
Replaces:
Yamaha 69J-13440-00-00
Yamaha 69J-13440-01-00
Yamaha 69J-13440-03-00

BOATLIFE MARINE SILICONE RUBBER
1140 $9.99 Tube Clear
1141 $9.99 Tube White
1142 $9.99 Tube Black
1150 $19.29 Cartridge Clear
1151 $19.29 Cartridge White
1152 $19.29 Cartridge Black
  
100% marine high quality silicone sealant. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure.
Excellent for sealing transom and pump sections when installing impeller.

CALIBER TRAILER BUNK SLIDES
23010 $34.95 Black
23011 $34.95 White
23013 $34.95 Yellow

Makes launching your boat or watercraft easy, slides effortlessly off bunks and into the water.
  • The new unique profile provides extra cushioning between the boat and trailer bunks.
  • Washout channels flush sand and debris off of the slides and away from the hull.
  • Safer unloading and loading because of reduced friction and stress by 400% on the trailer cranking mechanisms, ropes and hull bow hooks.
  • Allows you to unload and load your boat or watercraft in shallower water.
  • Fast and simple installation.
  • Made from a low-friction composite which is impervious to sun, weather and salt water.

CALIBER TRAILER BUNK WRAP
23050-BK $49.95
 
16' roll covers up to two 2 x 4 x 8' bunks
Replace your old ripped carpeted bunks with a smooth permanent solution.
  • Less strain on arms, ropes, pulleys, and bow eyes
  • End Caps and All Stainless hardware included
  • Bunk Wrap mounts directly over bare wood

CORROSION TECHNOLOGIES CORROSION X
90101 $11.09 6oz
90102 $20.89 16oz
  
CorrosionX is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! Although it may look like a typical oil-based anti corrosion spray, CorrosionX utilizes a revolutionary technology called Polar Bonding that does far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. Corrosion-X actually kills existing rust and corrosion (keeping it from spreading) and provides long-term protection against rust and corrosion on any metal surface.

COVERCRAFT ULTRATECT COVER
4004-0244 $179.95 FZR
4004-0243 $179.95 FZS
  • Ultra'tect® is a high-performance fabric that provides great protection against UV rays, is very breathable and fade-resistant
  • All seams are overlapped and double-stitched for superior strength
  • Strong, bar-tacked tie-down loops secure the cover on watercraft for trailering (rope not included)
  • Underside of cover has heavy-duty double-layer reinforcement panels in high-abrasion areas
  • Reinforced opening for trailer pins and security straps
  • Adjustable, heavy-duty shock cord sewn around the entire hem
  • Reflexite® safety reflector strips sewn on the back to give additional warning when the watercraft is moored or on a trailer (meets Federal and USCG specs)
  • Non-scratch, corrosion-free access zipper behind handlebar for vest and wetsuit storage; sewn-in quick-dry mesh bag with hook-and-loop closure to store gloves, goggles and other small items
  • Zippered gas cap access panel allows fueling while the watercraft is on a trailer
  • Easy to clean

CRC 6-56 MULTI PURPOSE LUBRICANT
06007 $8.99
 11oz. Aerosol

06008 $49.99 Gallon

A versatile petroleum based compound that forms a clear, thin film that lubricates and protects against wear & corrosion. Multi-purpose product lubricates, protects, & displaces moisture all in one.

CRC SALT TERMINATOR
SX32M $29.99
32 Oz. with Mixer 
SX32 $17.99  32 Oz.
SX128 $39.99 1 Gal.

Cleans & protects anything exposed to salt ( saltwater, salt air, road salt ). Dissolves salt & leaves a protective coating to inhibit corrosion. Essential as a motor flush for marine engines in both saltwater and freshwater environments.

   
 
DSS YAMAHA DRIVESHAFT HOLDER
TOOL53 $32.95

ENGINE TECH LOW BOOST SUPERCHARGER WHEEL
ET-SHO-LB $519.00
  
11.3 lbs @ 7700 rpm and 14lbs @ 8450 rpm

 
ENGINE TECH HIGH BOOST SUPERCHARGER WHEEL
ET-SHO-HB $599.00
  
15.5 lbs of boost @ 8350 rpm

 
   
HOTCAMS VALVE SHIM KIT
HCSHIM02 $89.95
  
9.48mm Complete shim kit 1.20-3.50mm in .05mm increments with 3 shims in each size

HT MOTO OIL EXTRACTOR
OIL01 $65.00

Make changing the oil on your 4 stroke PWC clean and hastle free. Holds up to 6 liters (1.5 gal) in this sturdy portable container. Pump included.

HT MOTO OIL EXTRACTOR
OIL03 $130.00

Ideal for bigger jobs and shops, this larger capacity oil/fluid extractor makes changing the oil on your 4 stroke PWC, boat, snowmobile, ATV, lawn mower, etc. clean and hastle free. Holds up to 15 liters (3.92 gal) in this sturdy portable container with built in pump.

HYDRO-TURF SPLASH GUARD
TS03
$64.95

60" Universal Splash Guard. Includes hardware.
Made of a high density EVA foam, for a drier ride.

ISLAND RACING
INTERMEDIATE HOUSING ASSEMBLY
IR-IHA-406 $239.95

There are many low cost ( and low quality ) intermediate housing assemblies on the market. We have yet to see one that is assembled correctly or use anything other than an inferior quality bearing. 

We utilize some of the aftermarket components to keep costs down but includes the OEM Yamaha bearing to insure both reliability and durability. Each housing is assembled individually and correctly to insure a quality part.

ISLAND RACING
MARINE LIQUID PUMP GREASE
IR-MLPG $14.95
 6oz


We are often asked what is the BEST grease to use in jet pumps. The answer is our MARINE LIQUID PUMP GREASE. Our grease is composed of MARINE lubricants and is blended specifically for use in jet pumps. Regular grease is too thick and once "flung" off the bearings will lead to failure in short time. Our Marine Liquid Pump Gease will flow to the bearings offering unequaled PERFORMANCE and PROTECTION. Recommended for jet pumps in ALL watercraft from stock to fully modified.

ISLAND RACING
QUICK CONNECT FLUSH KIT
IR-QCFK-SE-B $54.95
( Blue )
IR-QCFK-SE-R $54.95 ( Red )

Replace, relocate or simply upgrade your leaky, worn out OEM flush assembly to our HIGH QUALITY, user friendly Quick Connect Flush Kit. Just a simple push and the couplers snap together forming a solid LEAKPROOF connection.

ISLAND RACING
QUICK CONNECT FLUSH RELOCATION KIT
IR-QCFRK-B $64.95
Blue
IR-QCFRK-R $64.95 Red

Many watercraft come from the factory with the flush connection in a very inconvenient location. Not to mention they leak in a short period of time. 
Our Quick Connece Flush Relocation Kit RELOCATES and UPGRADES your leaky, worn out OEM flush assembly to a more user friendly location in the hull. Just a simple push and the couplers snap together forming a solid LEAKPROOF connection.

 
 
ISLAND RACING
SPARK PLUG INDEX WASHER KIT
IR-SPIWK-14 $29.95

Our SPARK PLUG INDEX WASHER KIT allows you to “index” or align the direction of the electrode for more efficient combustion, HIGHER HORSEPOWER, and HIGHER PEAK RPM. Washers are made from 100% Stainless Steel and will not corrode in marine environments. Washers are reuseable.

ISLAND RACING
T-BOLT HOSE CLAMP KIT - WATERBOX
IR-TBCK-Y-FZR-WB $17.95

Exhaust leaks rob performance, lose races, and possibly flood your engine. Replace the weak OEM clamps with "Marine Exhaust Standard" 100% Stainless Steel T-Bolt Clamps.  
ISLAND RACING
TOW VALVE KIT
IR-TVK58 $24.95

Our Tow Valves bodies are 450PSI plated brass construction. Full flow inner diameter doesnt restrict cooling water. During towing situations, it's mandatory to shut off the inlet water hose to prevent engine damage.

ISLAND RACING
WATER STRAINER KIT
IR-WSK-12 $49.95 For 1/2" Hose
IR-WSK-58 $49.95 For 5/8" Hose

Our WATER STRAINER KITS are the finest kits available on the market.  Keep unwanted debris out of your engine and cooling system. Mounts in any position. Straight and 90 degree fittings allow for unlimited hose routing.  Marine grade mounting and hose clamps included. 

JETTRIM SEAT COVER
$289.00
FZR

JETTRIM SEAT COVER
$289.00
FZS

KLOTZ ESTORLIN RACING PERFORMANCE SYNTHETIC ENGINE LUBRICANT
KE-940 $13.99 10W/40 Quart
KE-955 $13.99 15W/50 Quart
  
• Designed for racing and performance applications
• Improves acceleration and throttle response
• Contains extra zinc and phosphorus to protect critical engine parts
• Extends cam roller bearing and flat tappet cam life
• Reduces oil out temperature
• Enhanced flowability provides Less Drag-More Power®

PURE ESTORLIN® MARINE 4-STROKE PERFORMANCE 10W/40
KE-334 $12.99
Quart
KE-335 $47.99 Gallon
  
Designed for all outboard, inboard, I/O and PWC four stroke engines
Certified warranty compliant
Provides performance advantages for leading outboard, inboard, I/O and PWC engines

 
KWIK TEK DOCK LINES
PWCD-2 $12.95
 
These dock lines are incredibly versatile and functional. A giant snap hook is spliced to one end for attaching to ski eyes, cleats, bow eyes and mooring rings. There's a 10" loop on the other end for attaching to dock cleats. Finished length is 7 ft. Great for PWC's and jet boats. 2 per package.

KWIK TEK PWC TOW STRAP
TS-15 $12.95
  • Stows handily; perfect to have around in emergencies
  • Yellow floating strap measures 15' with a 10" loop at each end, and includes a detachable heavy-duty carabiner
  • Comes with a mesh bag with drawstring and cord lock
  • 1,500-lb. tensile strength

MAXIMA MAXUM 4 EXTRA
16901 $16.50
10w40 Liter
169128 $59.95 10w40 Gallon
 
Extra4 is a 100% synthetic motor oil featuring advanced additive technology. By using today’s most advanced additive systems and high-performance synthetic ester based stocks, we have engineered what we believe to be the finest 4-cycle motorcycle specific oil available on the market today. The very latest shear stable polymer systems have been used to assure viscosity stability and virtually eliminate transmission “shear-down” of the oil.

MAXIMA PRO PLUS+
02901 $12.50 10w40 Liter
029128 $42.95 10w40 Gallon
 
PRO PLUS+ is an ester fortified full synthetic 4T engine oil. PRO PLUS+ is formulated to exceed JASO MA requirements for 4-cycle engines with integrated wet clutches. Balanced additive system minimizes engine deposits while protecting critical engine, transmission and clutch components. PRO PLUS+ is designed to prolong engine and wet clutch life and offers excellent feel. For maximum protection and reliability use Maxima Racing Oils. Meets or exceeds JASO MA, API SL/SJ/SH/SG.

MAXIMA SYNBLEND4
34901 $10.50
10w40 Liter
349128 $36.95 10w40 Gallon

Maxima’s Synthetic Blend4 is a blend of ester-based synthetic and petroleum base stocks featuring advanced technology. This special high temperature formula protects critical engine components, reduces wear, friction, temperature, oil consumption and extends drain intervals. The use of new anti-shear additives assures viscosity stability for 4-cycle engines. This formula also has extra anti-scuff additives to handle extreme loads and peak temperatures.

MAXIMA PWC MARINE 4T
14901
$8.25 10w40 Liter

PWC Marine 4T is a superior product featuring advanced additive technology in the development of highly stable and long life multi-grade PWC specific oil. By using an exclusive blend of petroleum base stocks and advanced anti-wear, anti-shear additives, this product assures viscosity stability for 4-cycle engines. This formula also has extra anti-scuff additives to handle extreme loads and peak temperatures in high performance engines. Exceeds FC-W specifications and all known OEM requirements.


MAXIMA MPPL PENETRANT LUBRICANT
73920 $8.95

Maxima Multi Purpose Penetrant Lube is a superior, all purpose penetrating lube that displaces water and provides excellent rust and corrosion protection. It is useful wherever a penetrating lubricant is required. Maxima MPPL forms a protective film on metal and will not harm plastic or painted surfaces. Excellent fogging oil or starting fluid for 2-cycle or 4-cycle engines.

MOTION PRO OIL FILTER STRAP WRENCH
08-0069 $9.95

Fits all spin-on type oil filters
Use with 3/8 inch drive ratchet or extension
Can also be used to hold other cylindrically shaped parts
Maximum strap diameter 125mm ( 5 inches)

NGK SPARK PLUG
LFR6A $7.25

OPPAMA ENGINE TACHOMETER
PET-2100DXR $299.95

PARTS UNLIMITED BATTERY
HEAVY DUTY
RCB16CL-B $56.95
( Yuasa Equivelent YB16CL-B )

  • Powerful starting power at a great price
  • Build to the same exacting specifications and quality-control standards as top brand-name Japanese batteries
  • Rugged and provide more power over standard conventional batteries
  • Includes anti-sulfation chemical formulated to reduce sulfate crystal buildup on the battery plates
  • Heavy-Duty batteries are shipped dry ( Acid not included )

PARTS UNLIMITED BATTERY
AGM MAINTENANCE FREE
2113-0043 $99.95 ( Yuasa Equivalent YB16CL-B )

  • Parts Unlimited is proud to offer a premium-quality, maintenance-free battery at a great low price
  • Special absorbed-glass mat batteries eliminate water loss, permitting the battery to be permanently sealed once it is filled with acid
  • Acid Pak included
  • Holds charge three times longer than conventional batteries
  • ( UPS Ground Shipping only )

   
PERMATEX MOTOSEAL GASKET MAKER
29132 $7.95

Excellent for sealing supercharger housing when installing aftermarket wheel.

   
POWER MAX MAINTENANCE-FREE BATTERY
GTX16CL-BS $94.95
  • High performance AGM. Sealed type, maintenance free
  • Completely sealed black case can be mounted in almost any position
  • Advanced technology allows very high power discharge
  • Accepts a high rate of recharge without damage to the battery
  • Can be recharged over 90% in less than one hour on a regulated charger
  • Battery MUST BE CHARGED in the same manner as any lead acid battery
  • When not in service, battery should be charged once a month

PROK AIR FILTER
006-590 $116.95
  • OEM stock replacement air filters
  • Washable and reusable to maximize performance and budget
  • Clean air filters increase airflow, meaning more power and greater performance

R&D AQUAVEIN INTAKE GRATE FZ SHO
112-18001 $249.95
112-18004 $299.95 2014

R&D performance is proud to announce the release of the new FZR/FZS Aquavein top loader intake grate. The new R&D Aquavein is a race bred design that is already a proven winner in both offshore and closed course competition. Winning handily the APBA sprint offshore nationals, and dominating the 2009 APBA National Tour in PRO STOCK Runabout. The huge FZR pump intake demands strength and an extra large wing for maximum hook up. The new R&D FZR grate utilizes an all new ultra strong 3 bar front mount strut design to support a new "extra wide" forward mounted wing that is guaranteed to top load the FZ pump with enough water to stay hooked up and moving forward in the roughest water conditions. The new "SUPER DEEP" race legal bars are the biggest and strongest we have ever built to deliver unmatched strength. Big pump inlets need big grates, and that’s what we have built. It’s super strong, it’s fast, and it’s a proven class winner. Trust your FZ to the race proven, race winning, patented technology only R&D can deliver. Anything less is second best. Order yours today and get hooked up.

R&D AQUAVEIN INTAKE GRATE FX SHO
112-18000 $249.95

The R&D Yamaha FX SHO Aquavein Intake Grate will significantly reduce cavitation, increase acceleration, add up to 1 mph on top end performance, and keep the pump loaded and hooked up!

R&D HIGH PERFORMANCE RACING BILLET SUPERCHARGER SHAFT
612-25020 $369.95


R&D's new High Performance Billet Supercharger Shaft eliminates the weak design features of the OEM and aftermarket HKS supercharger shaft. After analyzing the OEM HKS shaft design and sorting through the various failures we had with it while testing our popular Monster S/C Wheels, we developed a superior shaft design.
The new R&D shaft is not a copy of the fragile HKS design. Rather, it is a completely new design, superior in material strength and improved in every way.

The new R&D Shaft is precision cnc machined, heat treated, and precision ground from billet steel alloy. Featuring a uni-structure design that incorporates the shaft and gear as one billet piece, much like a transmission shaft. This eliminates the fracture point on the OEM design where the gear shears off the end of the shaft. The billet design will not allow the gear to slip under high boost loads like the pressed on OEM gear.

Next we increased the inadequate 6mm thread diameter on the OEM shaft to utilize a well proven “Turbo spec” LARGER 5/16-24 left handed thread that will not break under extreme conditions. The larger thread diameter will also allow wheel torque specs to be increased safely.

Lastly, we reduced the weight of the R&D Supercharger shaft by eliminating the hex nut on rear the gear and lightened the end of the shaft/gear inside diameter to significantly reduce reciprocating weight. We all know what that will do to add to clutch performance. Used by Chris MacClugage to win the 09’ APBA Pro Open Runabout National Championship. Kit comes complete with larger nut and installation instructions. All in all, the new R&D High Performance Billet Racing Shaft is not just a replacement shaft, but a solution to end all supercharger shaft problems.
R&D also offers a bearing rebuild kit to replace worn supercharger bearings Pt. # 612-25025.

• Superior material strength
• Precision heat treat and grind finish for reduced friction
• Increased thread size over stock to turbocharger specifications
• Integral gear/shaft design is much stronger than O.E.M.
• Lighter weight will increase performance
• Increased supercharger and engine protection
• Improved clutch performance

R&D LOW FRICTION DUAL WASHER IMPELLER SPACER KIT
132-81111 $54.95
  
The R&D “Dual Washer” Impeller Spacer Kit replaces the O.E.M. single seal washer with a specifically designed and machined kit that incorporates a second low friction slip washer to be used which allows impellers to be removed with 50 percent less torque during the impeller removal process! Tired of Impellers that are so galled up that impellors have to be machined or cut off? Tired of broken impeller tools and broken vises? Install the R&D low friction “Dual Washer” Kit and impeller removal will be super easy when making impeller changes. Many SVHO owners have had these issues and have had to cut up and throw away impellers and repair damaged threads. The R&D Kit puts to end all the expensive repairs and downtime with these issues. The R&D “Dual Washer” Kit fits all Yamaha models both supercharged and N.A. from 2008 and up.

RHAAS URETHANE MOTOR MOUNT
YAM4STRMOUNT $50.00
  
These mounts are made from 6061 aluminum and anidozed for corrosion protection and a long life. The urethane is locked into the base and the threaded insert to provide a one piece, mechanical lock on all components. These mounts do not rely on glue to hold things together, the mount is molded at one time with the billet threaded insert and the billet aluminum base. These are made to the highest standards in our own manufacturing facility right here in the USA. There is 4 years of R&D that went into making these mounts the best you can buy for your Yamaha.
Motor mounts sold individually.

RIVA BILLET DRIVESHAFT SLEEVE KIT
RY30040-DSS $49.95

Riva's precision machined Billet Driveshaft Sleeve Kit is a direct replacement for the thin factory rubber hose that is prone to distortion and failure. Sleeve is constructed of 6061 aluminum and is anodized to prevent corrosion. Kit includes high quality silicon couplers and stainless steel clamps. This upgraded sleeve kit is highly recommended for performance applications due to increased pump pressure that accelerates failure of original rubber hose.
  • Direct heavy-duty replacement for original thin rubber hose.
  • Anodized to prevent corrosion.
  • High quality silicon couplers.
  • Overlapping clamp design features smooth inner surface to prevent coupler damage.
  • Recommended for all performance applications.

RIVA BLOW-OFF VALVE KIT
RY17040-BOV-SSQV $274.95


High quality HKS Blow-off Valve reduces wear and tear on clutch & drive gears of supercharger and eliminates heat soak in discharge tube. For use with RIVA FX-SHO/FZ Power Cooler (part# RY17040-PC). HKS Super SQV (Super Sequential Blow Off Valve) features unique sequential valve structure and a differential pressure control system, allowing for a broad operation boost range. Includes vacuum line and specific fittings necessary for installation.

RIVA ENGINE BREATHER UPGRADE KIT
RY19040-EBUK $47.95

Easy to install Engine Breather Upgrade Kit eliminates power-robbing crankcase emissions from your engine's air intake. Increases horsepower by removing the engine's requirement to burn relatively non-combustible oil. Also improves intercooler efficiency by preventing the oil sludge coating that lowers thermal efficiency. Easy installation retains highly efficient OEM air/oil separator system. Kit includes pre-formed hose with attached K&N filter along with all necessary hardware & instructions.

RIVA FUEL PRESSURE REGULATOR KIT FZR / FZS
RY12040-RRFPR-6S5 $474.95

Riva's Fuel Pressure Regulator Kit provides the precision pressure control necessary to compliment aftermarket ECU applications on the FZ SHO engine. Kit is fully assembled & mounts securely on top of fuel tank via sturdy aluminum bracket. High quality billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing one additional pound of fuel pressure for every pound of boost gain. Plugs directly into original fuel system with OEM connectors and features a large 3/8" fuel return line that is routed through supplied rubber fuel tank cap. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-Off necessary for removal of stock fuel pressure regulator in fuel tank.

Key Features Include:
Precision fuel pressure control with optional rising rate function.
High quality stainless steel liquid-filled pressure gage.
Large 3/8 fuel return line.
Includes billet Fuel Pressure Regulator Block-Off.
Easy bolt-on installation with OEM fuel connectors.
Includes complete installation instructions & tuning guide.

   
RIVA FUEL PRESSURE REGULATOR KIT 12-18 FX
RY12070-RRFPR-6S5 $474.95

Riva's Fuel Pressure Regulator Kit provides the precision pressure control necessary to compliment aftermarket ECU applications on the FX SHO engine. Kit is fully assembled & mounts securely on top of fuel tank via sturdy aluminum bracket. High quality billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing one additional pound of fuel pressure for every pound of boost gain. Plugs directly into original fuel system with OEM connectors and features a large 3/8" fuel return line that is routed through supplied rubber fuel tank cap. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-Off necessary for removal of stock fuel pressure regulator in fuel tank.

Key Features Include:
Precision fuel pressure control with optional rising rate function.
High quality stainless steel liquid-filled pressure gage.
Large 3/8 fuel return line.
Includes billet Fuel Pressure Regulator Block-Off.
Easy bolt-on installation with OEM fuel connectors.
Includes complete installation instructions & tuning guide.

RIVA HIGH FLOW BILLET FUEL RAIL
RY12040-BFR $259.95
 
Our High Flow Fuel Rail is an essential upgrade to your fuel system to support increased horsepower from supercharger or turbo modifications. Directly replaces restrictive factory fuel rail for improved fuel delivery and enhances the appearance of your engine bay. Precision machined billet aluminum rail features a unique bracket system that adapts to a variety of injector sizes & lengths. Large body design provides increased flow capabilities to support 500+ horsepower applications. Inlet fitting accepts OEM Yamaha fuel connector for easy plug-in installation. Includes fittings for flow-through fuel routing to eliminate injector supply fluctuation and keep fuel cooler. Can also be set up with OEM dead head routing via supplied fuel pressure gauge or plug. Constructed of 6061 billet aluminum and anodized to prevent corrosion. Includes all necessary mounting hardware and complete installation instructions.

Key Features:

  • High flow fuel delivery supports more power.
  • Fits all Yamaha OEM injectors along with RIVA 100lb Pro-Series Fuel Injectors (part# RY12040-I-KIT-100).
  • Accepts OEM Yamaha fuel connector fitting for easy installation.
  • Delivers equal fuel supply to injectors with flow-through fuel routing.
  • Billet aluminum construction and anodized to prevent corrosion.
  • Can also be used on stock engine with stock injectors for cosmetic upgrade.

RIVA INTAKE GRATE FZ
RY22050 $199.95
  • Dramatic increase in hook up due to top-loader wing design.
  • Improved top speed in choppy water conditions.
  • No top speed loss on smooth water.
  • Beefy tri-bar designed to withstand high speed applications.
  • Powder coated to prevent corrosion.

RIVA INTAKE MANIFOLD UPGRADE KIT
RY12040-IMUK $39.95

Riva's Intake Manifold Upgrade Kit enables your FZR / FZS engine to produce more horsepower by delivering increased air flow and boost pressure (+1lb). Precision tapered billet sleeve directly replaces restrictive mesh element in intake manifold. Provides improved low end punch and mid range pull through quick & easy installation. Includes detailed installation instructions. NOTE: Riva's testing has determined the stock ECU will compensate for the increased boost provided by the Intake Manifold Upgrade Kit.


 
RIVA OEM INTERCOOLER UPGRADE KIT
RY17040-ICUK $249.95

The RIVA OEM Intercooler Upgrade Kit delivers a huge performance gain to your stock intercooler system. This cost efficient upgrade kit features billet aluminum spacers that increase the end tank capacity & water flow in and out of OEM intercooler.

Key Benefits Include:

  • Intercooler exit temps average 30-degrees cooler than stock.
  • Increased horsepower with cooler, denser air temps.
  • No drilling or machining required to OEM intercooler.
  • Includes billet "high-flow" pump strainer providing a second dedicated waterline to intercooler.
  • Replaceable sacrificial zinc anode protects cooling system from corrosion.

  • RIVA PERFORMANCE BLOW-OFF VALVE KIT
    RY17040-BV $379.95
      
    Riva's Performance Blow-off Valve Kit improves supercharger reliability and performance by relieving unwanted pressure during off-throttle operation. Reduces supercharger clutch & gear wear and eliminates heat soak in discharge tube. High-strength silicone hose with integrated HKS valve installs easily in place of OEM elbow joint. Includes high quality HKS Super SQV (Super Sequential Blow-off Valve) that features unique sequential valve structure and a differential pressure control system, allowing for a broad operation boost range. Also includes vacuum line and fittings necessary for installation on SVHO & SHO engines. A simple and cost effective upgrade for both stock and modified engines.

    RIVA PISTON KIT
    RY1000-6S5-86 $239.95

    Our forged racing pistons deliver maximum reliability and performance in high boost & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks.

    Key Features Include:

  • 8.6:1 compression ration.
  • CNC machined from high strength/lightweight forgings.
  • Optimized dome design for efficient combustion.
  • Improved lubrication hole placement for reduced friction.
  • Premium low friction ring package.
  • High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
  • Carbon steel wire locks.
  • IJSBA/APBA Stock Class Legal

  • RIVA POWER COOLER
    RY17040-PC $994.95

    The RIVA Power Cooler intercooler system features a huge cooler element that is rated for up to 450hp. Delivers an increase of 20 peak horsepower over original intercooler providing arm-wrenching results on the water. Quality manufacturing of cooler core ensures the highest boost pressure capacities, minimal pressure drops and excellent thermal efficiency. The cooling element is dramatically more efficient than the stock unit with exit temperatures averaging 60F cooler than stock. This delivers cooler, denser air for increased performance throughout the RPM range. Innovative design allows easy disassembly of cooler element & ducting for maintenance and cleaning. Features integrated blow-off valve mount that will accept RIVA/HKS Blow-Off Valve kit (sold separately) for improved supercharger reliability and performance. Power cooler installs securely with shock absorbing rubber mounting system and stainless steel hardware. Kit contains all necessary hardware and detailed installation instructions.
    Key Features Include:
    • Large cooler element rated for 450hp.
    • Designed to allow easy disassembly of cooler element & ducting for cleaning.
    • Integrated mount for optional RIVA/HKS Blow-Off Valve Kit (sold separately).
    • Includes billet "high flow" pump strainer providing a dedicated waterline to Power Cooler.
    • Replaceable sacrificial zinc anodes protect cooler element from corrosion.
    • Quick release flushing system keeps Power Cooler at peak performance.

    RIVA POWER FILTER KIT 16-09 FZ & 11-08 FX
    RY13040 $299.95

    Our Power Filter feeds your FZ / FX a steady diet of cool air delivering greatly improved acceleration and rpm. Replaces restrictive stock air box with a high-volume, precision-formed intake duct that attaches to the supercharger via a large 4” adapter. Cool air enters the system via an oversized K&N filter element. Includes water-repellent pre-filter.

    RIVA PRO-SERIES REDUCTION NOZZLE
    RY23040-N $419.95

    Pro-Series Reduction Nozzle is ideal for tuning your Yamaha pump combination to maximize performance. Nozzle exit diameter can be easily changed via interchangeable ring system. Looking for more RPM or acceleration power? Insert a larger diameter ring. Want more top speed or less RPM? Install a smaller diameter ring. Nozzle includes three precision-machined stainless steel rings in graduated sizes (81, 82 & 83mm). Additional ring sizes available.

    Note: Nozzle eliminates water spout function to maximize performance and conform to racing safety rules.
    RIVA REAR EXHAUST KIT
    RY15050 $329.95


    Kit allows removal of restrictive sound suppression system located between waterbox and hull exit. Improves engine performance by reducing back pressure and restriction. Includes custom molded exhaust tube, billet through-hull exhaust outlet and OE exhaust outlet block-off along with all necessary mounting hardware & installation instructions.

    RIVA RIDEPLATE 08-11 FX
    RY21040 $199.95
      
    Riva's  FX-SHO Ride Plate delivers the perfect balance of top speed and improved handling in a variety of water conditions and speeds. Its race bred design features deep channels for improved acceleration and traction in turns. Provides excellent straightline stability at high speed with reduced porposing. Accepts OEM speedo sensor.
    Key Benefits Include:
    • Superior handling performance.
    • Quicker planing & improved top speed.
    • Reduced porposing.
    • Improved straight line tracking at high speed.
    • Race bred design.
    • Improved acceleration, cornering and straight line handling.
    • Powder coated to prevent corrosion.
    • IJSBA/APBA Race Legal and Race Proven

    RIVA RIDEPLATE 09-14 FZR / FZS
    RY21050 $249.95
      
    Riva's FZ Ride Plate delivers the perfect balance of top speed and improved handling in a variety of water conditions and speeds. Its race bred design features deep channels for improved acceleration and traction in turns. Provides excellent straightline stability at high speed with reduced porposing. Utilizes stock ride plate support brackets and accepts OEM speedo sensor.
    Key Benefits Include:
    • Superior handling performance.
    • Quicker planing & improved top speed.
    • Reduced porposing.
    • Improved straight line tracking at high speed.
    • Race bred design.
    • Improved acceleration, cornering and straight line handling.
    • Tunable with included shims.
    • Powder coated to prevent corrosion.
    • IJSBA/APBA Race Legal and Race Proven

    RIVA SOLAS DYNAFLY IMPELLER
    YS-DF-13/22R $299.95


    This all new impeller delivers unmatched acceleration & top speed in Yamaha FX-SHO/FZ applications. The "R" Series impeller is precision tuned to RIVA specifications using a pitch block fixture. This offers a higher level of consistency when matched with RIVA Performance Kits. Includes billet impeller cone that locks solidly into place with 3 stainless set screws. Ideal for Riva Stage 1 applications or higher levels of modification when matched with RIVA Pro-Series FX-SHO/FZ Reduction Nozzle (part# RY23040-N).

    RIVA SUPERCHARGER IMPELLERS
    RY17040-SCI-B2 $499.95
    RY17040-SCI-E2 $599.95

    Presenting the ultimate (drop-in) performance supercharger impellers for the Yamaha 1.8 liter SHO Engine! Working closely with Vortech Engineers, we designed these impellers to deliver more horsepower and torque throughout the RPM range resulting in excellent acceleration and top speed. Investment cast from an extremely strong, lightweight proprietary aluminum and CNC machined to ensure exact tolerances. All new blade design is optimized aerodynamically and precision balanced to deliver smooth operation. Installs easily into stock supercharger housing with no modifications required. Includes detailed installation instructions.

    B1 produces 11.5psi @ 7,700rpm
    E1 produces 16psi @ 8,000rpm


    RIVA SUPERCHARGER SHAFT UPGRADE KIT
    RY17040-UK-6S5-3 $499.95
     
    Riva's Super-Duty ‘GEN-3’ Supercharger Shaft Kit provides the ultimate in reliability for high boost applications. Kit features a revolutionary hydraulic shaft stabilization bearing that limits shaft deflection and wear. Bearing stabilizes end of supercharger shaft via high pressure oil film dramatically increasing the stability of the system. Hydraulic end bearing and one-piece shaft bearing are fed by a through-shaft oiling system providing superior lubrication. Oil is delivered by braided stainless line and injected into a billet end cap that houses hydraulic bearing. Shaft is precision machined from a single piece of high-strength billet steel producing shaft, collar & gear as one piece. This eliminates the common failure point on stock shafts where OEM gear is pressed onto shaft. Shaft also features larger diameter threads & nut for added strength. Kit includes new one piece bearing with increased surface area providing improved torsional stability of shaft. Bearing features superior materials & finish treatment for reduced friction & abrasion resistance. This Shaft & Bearing Kit is a direct replacement for OEM parts and requires no additional modifications for use.

    RIVA THERMOSTAT DELETE KIT
    RY1013-40-TR $22.95
     
    Allows Yamaha SVHO, SHO & HO engines to run cooler by replacing the thermostat with a specialized restrictor. Ideal for modified watercraft operating in high air & water temperatures. Designed to be used with RIVA Engine Cooling Upgrade Kits. Precision machined restrictor includes o-ring system for superior sealing in thermostat housing. Includes complete installation instructions.

    RIVA VALVE TRAIN UPGRADE KIT
    RY19040-VTU $724.95

    Riva's Valve Train Upgrade Kit increases the reliability of your modified engine by reducing the possibility of valve float at high rpm. Includes lightweight, precision-machined titanium valve retainers, racing valve springs, and base washers.

     
       
       
    SIERRA OIL FILTER
    SIE-Y-1 $11.95

    Replaces Yamaha 69J-13440-01-00

    SKAT-TRAK BILLET NOSE BOOT
    RIMPNOSEBOOTYAMSHO $48.50

    Fits Skat-Trak SY557525SW impellers.

    SKAT-TRAK DRIVE SHAFT WRENCH
    RWRYAMDSSHO $32.99

    SKAT-TRAK IMPELLER
    SY557525SW1119 $329.95
    11/19
    SY557525SW1220 $329.95 12/20
    SY557525SW1321 $329.95 13/21
    SY557525SW1322 $329.95 13/22
    SY557525SW1323 $329.95 13/23
    SY557525SW1324 $329.95 13/24


    Billet aluminum nose boot included.

    SLP FLOW-RITE INTAKE KITS
    14-197 $24.95
    2"
    14-258 $47.95 4"

    Eliminate air intake restrictions by installing the Flow-Rite™ in the the intake tract for more air box feed or anywhere on the body where more air is required. The Flow-Rite™ is supplied with a pre-filter that repels water, yet passes air right through. A must for modified engines. Sold per each.

    SOLAS BILLET IMPELLER CONE
    SLA014 $26.95

    Fits YS Dynafly Impeller

    SOLAS BILLET IMPELLER CONE
    SLA016 $26.95

    Fits YS Concord Impeller

    SOLAS DRIVESHAFT HOLDER
    WR014H $29.95

    SOLAS IMPELLER - CONCORD
    YS-CD 13/22 $269.95
    YS-CD 14/23 $269.95

    SOLAS IMPELLER - DYNAFLY
    YS-DF 14/21 $269.95
    YS-DF 15/22 $269.95

    SOLAS IMPELLER HOUSING STAINLESS
    YFS-HS-155 $319.95

    SOLAS IMPELLER TOOL
    WR014 $16.95

    SOLAS STAINLESS STEEL 12 VANE PUMP STATOR
    YSS-SV-160/74 $999.95 ( 160mm )

       
    TDR WATERBOX
    02-0085 $295.00

    TRAIL TECH TTO TACH-HOUR METER
    742-A00 $44.95 Black
      
    The surface mounted TTO Digital tach-hour meter allows you to easily monitor RPM and hours of use.

       
     
    TRAIL TECH TTO TACH-HOUR METER
    72-A00 $39.95 Silver
    723-A00 $39.95 Orange
    722-A00 $39.95 Black
     
    Digital tachometer and hour meter that works on all gasoline engine.

    WORX BILLET ENGINE COUPLER
    WR04003 $382.00
    • Billet Drive coupler for Yamaha 1.8 Engine
    • Fits any 1.8 Yamaha Engine
    • Billet construction huge strength upgrade over stock cast unit
    • Utilises OEM rubber coupler
    • A must for any High Horsepower/ Race watercraft

    WORX INTAKE GRATE FZ
    WR 233 $246.95

    WORX PUMP COOLING PLATE
    WR04030 $44.00
     
    The Worx Single fitting pump cooling plate is a billet anodised plate that fits directly onto the OEM Yamaha Jet unit, allowing an extra water fitting to be added to your watercraft's cooling system. A must for high horsepower applications.
    BRASS FITTING NOT INCLUDED.

       
     
    WORX PUMP SEAL KIT
    WR701 $85.00
     
    Fits Worx part # WR233

    WORX RIDEPLATE FZ
    WR 313 $332.95

    WORX SPONSONS FX
    WR 542 $329.95

    WORX sponsons are extensively tested "on the water" before going into production. Unbelievable cornering, better control in the rough and predictable inline tracking. WORX sponsons are easy to fit, look great and bolt right into stock mounting holes.

    WORX SPONSONS FZ
    WR 543 $355.95

    The new FZR, FZS is the latest in the Yamaha fleet and with a ton of get up and go the O.E.M sponsons just don’t let you get the best out of the boats handling and performance capabilities. Worx Racing has now developed a set of sponsons that have deeper backing rails that push the blade out further. The blades are also designed deeper to give you more blades in the water. The benefits of this are better handling when cornering; a smoother more controlled cornering, speed gain due to the boat riding higher in the water. They are also fully adjustable to suit every riders experience and capabilities.

    WORX SPONSONS
    WR554 $330.00 13 FZR

     
    WORX THROUGH HULL FITTING 1/2 INCH
    WR06004 $27.00
     
    Allows for easy installation of extra 1/2 inch cooling lines.

    WSM JET PUMP HOUSING
    003-508 $228.17
    REPLACEMENT WEAR RINGS
    003-522 $35.69

    Add performance and impeller life by installing an impeller housing with a replaceable plastic wear ring. Tighter clearances between the impeller and ring produces more thrust and reduces prop slip. Wear on the impeller is reduced because the plastic will wear before the outer edge of the impeller.

     
     
    WSM OIL FILTER
    006-564 $12.94

    Replaces:
    Yamaha 69J-13440-00-00
    Yamaha 69J-13440-01-00
    Yamaha 69J-13440-03-00

    YAMAHA COVER FZR
    MWV-CVRFZ-BL-GY $209.95

     
    YAMAHA COVER FZR
    MWV-CVRFZ-BK-GY $209.95

     

    YAMAHA DRAIN PLUG
    F1S-U2280-00-00 $8.72

    Replace your worn out drain plug or keep a spare on board.
    O-ring included.


    YAMAHA OIL FILTER
    69J-13440-03-00 $24.00

    YAMAHA TIE DOWNS
    MWV-CDTDN-BK-CB $17.95
    Cam Buckle Black
    MWV-CDTDN-BL-CB $17.95 Cam Buckle Blue
    MWV-CDTDN-BK-RB $18.95 Ratchet Buckle Black
    MWV-CDTDN-BL-RB $18.95 Ratchet Buckle Blue

    Made exclusively for Yamaha. Designed to meet Yamaha's high-quality specifications. Includes two scratch-resistant, vinyl-coated "S" hooks. Available with either cam buckle or rachet buckle. Cam buckle shown on left (blue), ratchet buckle shown on right (black). Sold individually.


    YUASA BATTERY
    YB16CL-B $73.95
    • Only Yuasa has Yumicron, the most powerful lead-acid battery of its size that appears as original equipment on more and more watercraft
    • All Yumicron batteries are shipped dry ( Acid not included )

    YUASA BATTERY
    YTX20HL-BS-PW $119.95
    • HIGH PERFORMANCE AGM MAINTENANCE-FREE
    • This new generation of maintenance-free batteries delivers higher cranking amps for vehicles that require extra starting power
    • Additional cranking amps make these one of the most powerful batteries on the market
    • Acid Pak included ( Contintal USA Ground Shipping Only )